Zigbee LED Dimmer Technical data:
Input Voltage: DC12~24V
Size: 23.5x48x89mm
Ouput Current/Channel: 6 A max
Protection rate: IP20
Total Output Current: 15A max
Operating Temperature: -20°C~60°C
Common Anode
Constant Voltage
How to link with remote controller:
1, Within 3 seconds after power on, click the "on" button of the group to conduct
code matching, and the LED light turns green, indicating successful code matching.
2, Long press the "off" button of the remote control to enter the night light mode,
and the brightness and color can still be adjusted at this time.
3, long press the small moon key to enter the 60 seconds delay shutdown state.
4, Long press M key to enter automatic mode.
How to Unlink:
1, If the LED is still connected to the ZigBee gateway, long press the "on" button on
the remote control within 3 seconds after power on or press the button for 5 times
continuously, the light will flash for 5 times in the current color;
2,If the LED is not connected in the ZIGBEE gateway state, long press the "on"
button on the remote control within 3 seconds after power on or press the button
for 5 times continuously, then the LED light will be fully bright and flashing for 5
times;
George